Pencil – Knife – Scissors – Brush – Paperhanger spatula –Glue roller – Bucket – Plumb – Glue (Metylan)
Prepare the wall, sanding and filling any holes or cracks, making it as uniform and smooth as possible
The wallpaper will have on the back of each roll a numbering (from left to right) to facilitate the composition of the drawing.
Starting from roll no. 1, apply the paper from the starting point of the wall. Place the roll and spread it from top to bottom. When it’s pasted remove any bubbles with a cloth or with a paperhanger spatula.
If any electrical outlets or switches are on the wall, please remove the plaque and cut the paper crosswise in correspondence with the hole by folding the corners in and then put the plate back on the site.